Sonab OD-11 emblems needed
-
- (30+ posts)
- Posts: 32
- Joined: Mon 03 Jun 2013, 09:10
- Location: Seattle, Washington
Sonab OD-11 emblems needed
HI
First post, first set of Sonab speakers. Bought a set of pristine OD-11's for $100, wonderful shape and sound superb but they are missing the emblems. Anyone have a source or should i just camp out on ebay for some?
thanks!
alan
First post, first set of Sonab speakers. Bought a set of pristine OD-11's for $100, wonderful shape and sound superb but they are missing the emblems. Anyone have a source or should i just camp out on ebay for some?
thanks!
alan
Re: Sonab OD-11 emblems needed
That is a common problem with the OD11, and you are not the only one that are missing those.
So you can only hope to find them on Ebay.
And at last, welcome to CarlssonPlanet.
So you can only hope to find them on Ebay.
And at last, welcome to CarlssonPlanet.
Det finns alltid någon som vet mer.
-
- (30+ posts)
- Posts: 32
- Joined: Mon 03 Jun 2013, 09:10
- Location: Seattle, Washington
Re: Sonab OD-11 emblems needed
Thanks, appreciate the welcome! Will keep an eye on ebay then...
Re: Sonab OD-11 emblems needed
If you want to have them in the original state you will need four emblems. Maybe you already know it but many owners don't know that there where two emblems per speaker. Look at this picture: http://www.carlssonplanet.com/od11.php.
Mine have all four.
Mine have all four.
OD-11(T22+B65OAII), 3xOA12(T22+B65OAII), OA52.N, 3xL8, SC6, SC6.2
-
- (30+ posts)
- Posts: 32
- Joined: Mon 03 Jun 2013, 09:10
- Location: Seattle, Washington
Re: Sonab OD-11 emblems needed
Sure, go ahead and rub it in!
Re: Sonab OD-11 emblems needed
I'm sure they sound the same without the emblems. Enjoy them.
OD-11(T22+B65OAII), 3xOA12(T22+B65OAII), OA52.N, 3xL8, SC6, SC6.2
-
- (30+ posts)
- Posts: 32
- Joined: Mon 03 Jun 2013, 09:10
- Location: Seattle, Washington
Re: Sonab OD-11 emblems needed
I don't know, I would think they would give more of a classy sound if they were wearing emblems, they would feel better about themselve
-
- (30+ posts)
- Posts: 32
- Joined: Mon 03 Jun 2013, 09:10
- Location: Seattle, Washington
Re: Sonab OD-11 emblems needed
Still looking!
Re: Sonab OD-11 emblems needed
This is my first post here. Recently aquired a vintage set of OD11 speakers. I am in the process of trying to 3d print emblems. In the mean time here is a link , only five years after the post I am replying to (lol) for 3d printed logo tags in plastic. Don't know if they are correct size or not. Good luck.
https://www.shapeways.com/product/8LP6K ... arketplace
https://www.shapeways.com/product/8LP6K ... arketplace
Re: Sonab OD-11 emblems needed
The emblems from Shapeways are ok. You can read about how it started here: [url]
OD-11(T22+B65OAII), 3xOA12(T22+B65OAII), OA52.N, 3xL8, SC6, SC6.2
Who is online
Users browsing this forum: No registered users and 2 guests